polyurea elastomer system polyurea coating material spraying mial

polyurea elastomer system, polyurea coating material, polyurea spraying material

Two Parts Spraying Polyurea Elastomer CPU-107-329A-A/B

Two Parts Spraying Polyurea Elastomer CPU-107-329A-A/B

3. Roller, other casting elastomer replacement

CPU-107-329A-A/Btwo component pure polyurea spraying elastomer. It has more outstanding reactioncharacteristic,physical properties, chemical resistance and abrasion resistance than the general type spraying elastomer.

2. Water insensitivity- The curing ofCPU-107-329A-A/Bis affected very little bydampness, humidity.

3. 100% solid content- Without the aid of solventsor diluents that can evaporate and pollute the

4. Excellent physical properties – Includingelongation, tensile strength and abrasionresistance.

5. Consistent reactivity- No catalysts content.

6. Fast reactivity and curing- Generally gel within3-5 seconds after mixing and cured to walkon within 30

seconds. Can be sprayed onsloped or vertical surface without drips or runs.

High reactivity polyethamine, content chain extender

Methylene Diphenyklene Dissocyanate (MDI) base prepolymer.

The components are sensitive to moisture. Therefore, they must be stored in tightly sealed containers.

Moisture absorption by the B component will cause the formation of insoluble aggregate such as skin development. If the prescribed storage temperature of 255is adhered to, the shelf life is 6 months.

CPU-107-329A-A: 200kg/18kg blue drum.

CPU-107-329A-B: 200kg/18kg red drum.

Notice: These values are based on the test of our present laboratory test specimens.

Liquid Urethane for Mold Making & Casting

PU Coating for Wire Guide Roller (WGR)

PU V Pulley for Wafer Slicing Equipment

Liquid Urethane for molding & Casting

Liquid Urethane for molding & Casting

PU Coating for Wire Guid Roller (WGR)

PU V Pully for Wafter Slicing Equipment

Water-based Adhesive (For Shoes/Economical grade)

Liquid Urethane for molding & Casting

Two-component casting PU material for concrete mold

TPUCO Develops Economical Grade Water Based PU Adhesive

Taiwan PU Corporation (TPUCO) will exhibit at the worlds largest plastic and rubber fair, K2016

ADD: 3F-1, NO.9, WU-CHUAN 1ST ROAD, SINJHUANG DISTRICT, NEW TAIPEI CITY, TAIWAN, R.O.C (NEW TAIPEI INDUSTRIAL PARK)

© Taiwan PU Corporation All rights reserved.Tel886-2-22991666Fax886-2-22991888E-mail

Taiwan PU Corporation (TPUCO) is a professional manufacturer and a world-class factory ofpolyurea elastomer system, polyurea coating material, polyurea spraying material.With our leading producing technologies, TPUCO can produce various kinds ofpolyurea elastomer system, polyurea coating material, polyurea spraying materialaccording to clients requirement.TPUCO assures customers of the reliability and the top quality of thepolyurea elastomer system, polyurea coating material, polyurea spraying material.MoreCasting CPU,TPU Granules,PU Adhesives & Hot-Melt,Pneumatic Tubes,PU Beltings,PU Moulded Products.